MotioninJoy ver 0.4 available

Tue, 01/19/2010 - 21:26 — Acxie

Uninstall pre version refer to How to uninstall MotioninJoy
Install last version http://www.motioninjoy.com/download
install information refer to:

Xbox 360 Controller Emulator

Add battery information.It will be charging automatically when plug in via USB and the battery is not full.
- led4 or led1 led2 led3 led4=80%--full
- led3=60%
- led2=40%
- led1=dying
- led1 blinking=just before shutdown
- the lights scroll down each number=charging
Add vibration strength control function.
Add full keyboard emulator.
Add custom profile selector in quick start page.
Improve xbox 360 controller emulator vibration function.
Improve profile editor.

MotioninJoy Blog

Comments

Wed, 03/10/2010 - 17:30 — guest

Found Problem with Xbox360 Contoller Emulator

Hi Again, Im following this Project for a long Time.

By far, very good work. but i discovered a Problem when using XB360 Controler emulator.

if you Press many Buttons on the controller it keeps Resetting to default
Gamecontroller (instead of keeping the Xbox360 Controller Emulator)

Example

Left Stick to Upper left

Right Stick to Upper right

Pressing two directions of Digitalpad

and as much buttons as you can press with the Rest oy your Fingers.

^^ all That simultaneously

It seems to be ridiculous, but it happend twice today for me Playing Assassins Creed.

Unfortunately sometimes i even get a BSOD when this Happens.

BSOD claims xusb21.sys as faulty (obviously an Directinput system file)

Hope you manage to sort it out.RegardsKikinak

Mon, 03/08/2010 - 06:58 — innuendo

Does not detach x360 controller

I have a problem that I didn't have before.In earlier versions, If I enabled a non-x360 mode, like digital gamepad or something, then the virtual x360 controller was detachted/disabled. But recently, in the new version, it looks like that the virtual x360 controller is NOT detached/disabled when I switch to another mode. It's like as if two controllers were connected at the same time.This is not good, because some games cannot recognize any input from the digital gamepad mode now. They're expecting the input from the x360 controller...For exapmle in Tomb raider 4, if I I switcht to digital gamepad mode, nothing works! If I try to change the controls in the game's option menu, it just won't recognize when i'm pushing a button... and then if I swtich to x360 controller mode, it works again, but I can't use the dpad.... (or R2/L2 because they are analogs in x360 mode, and old games like that don't support that)You understand the problem?

Tue, 02/16/2010 - 12:24 — guest

the up date wont let me use

the up date wont let me use my anlog stick as my mouse it just jumos all over the screen could anyone help with that

Thu, 02/04/2010 - 14:33 — guest

Keep up the good work

Overall this is coming along quite nicely. In the interest of improving the driver further, here are the only problems I've discovered.1) The vibration test doesn't seem to trigger the left (small) motor in any of my DS3's. This can be verified by turning the right motor to 0%. All vibration will cease.2) Vibration doesn't seem to work with many programs if using XBox 360 controller emulation. (This may be the programs themselves at fault, however.)3) I wish I could provide more information, but with the most recent drivers and only once I got a BSOD as soon as I plugged in the controller. Something about an Xinput USB driver. This is the first BSOD I've had in years on my XP 32-bit system. Unfortunately it wasn't logged, so I couldn't investigate further.

Mon, 02/15/2010 - 13:35 — guest

Lack of left Vibration

Lack of left Vibration function verified in Windows 7 x64. Otherwise, the new additions in this .0001 update are great!

Tue, 02/16/2010 - 03:11 — guest

Also in XP SP3 (32-bit).

Also in XP SP3 (32-bit). However I can't confirm wether this is only for the "test vibration" feature, or in all uses.

Sat, 02/13/2010 - 05:09 — guest

if it uses x360ce for emulation

its probably an older version of the xinput wrapper

Mon, 02/01/2010 - 17:22 — guest

Profile Editor

Where can I edit custom profiles?My tabcontrol only contains: Profile Editor, pairing, Options and About ...

Mon, 02/01/2010 - 13:57 — guest

Install seems to be completely broken

tl;dr version:0.4 does not seem to give you the option of ONLY installing the USB driver. I've known since 0.3 that my bluetooth dongle won't work with this and installing the bluetooth drivers for motioninjoy will BREAK bluetooth functionality in general, without actually working with the PS3 controller either. Even worse, this new version of the bluetooth driver will bluescreen upon removing the bluetooth dongle.Short version:1. No option to install USB driver ONLY.2. My bluetooth dongle doesn't work with this, and installing completely BREAKS bluetooth functionality.3. 0.4 bluetooth driver adds the ability to bluescreen my computer upon removing the dongle.Will be sticking with 0.3 until the option of ONLY installing the USB driver is restored.

Sun, 02/07/2010 - 03:47 — guest

UP date?

This is a wonderfull program, and I use it often. My controller worked with the 0.3 version, but with the 0.4 version it didn't find my controller. I am a bit disappointed, and I would hope to see a bugfix of some sort!

Sun, 02/07/2010 - 03:45 — guest

UP date?

Thu, 01/28/2010 - 10:30 — guest

Bluetooth

The MotionInJoy-driver overwrites the driver for the internal BT-adapter of the Samsung N510. So it's either internal BT-adapter OR MotionInJoy-via-USB... :-(

Thu, 01/28/2010 - 06:02 — guest

First Congratulation and thx for the driver

First Congratulation and thx for the driver.This last one was the only that i got something with BT.Usb is great,but with BT besides the control's lights on,no one botton works,but when i unplug the Bt dongle,lights turns off,so i know they seeing each other.Any thougths?I bought another BT and nothing,its all correctly installed cause is charging to.Help somebody.I need it to work.

Thu, 01/28/2010 - 05:57 — guest

First Congratulation and thx

Sat, 01/23/2010 - 17:07 — guest

WORST UPDATE EVER

I used to be able to use my analog sticks as mouse axis but thanks to your HORRIBLE UPDATE when I do so it just spastically flings my mouse all over the screen!!! I have calibrated it multiple times and NOTHING HAS CHANGED!!! I really hope there is a fix because now all of my games are unplayable with my ps3 controller since they all use THE MOUSE!!!!

Tue, 01/26/2010 - 08:15 — guest

What a ungrateful bastard...

Why don't you shut the f*** up... If your don't like the update, rollback to the previous version, or at least show some respect for someone who's giving you this driver for free.Also, if you don't like it you can always unistall it and put your PS3 Controller you know where...Thanks Acxie.

Tue, 01/26/2010 - 19:59 — guest

Umm...

Thy don't support the old version dumbass.

Thu, 01/28/2010 - 06:05 — guest

forget it

If you dont like it just buy a microsoft controller and be happy,forget DS3 and leave it for who wants
see ya

Tue, 01/26/2010 - 08:10 — guest

What a ungrateful bastard...

Sat, 01/23/2010 - 16:33 — guest

dark void not working

still having 2 xbox controllers show up in input devices menu. the first one is sending x+ on left analog, and some games such as dark void only see the controller data from the fake controller.

Sat, 01/23/2010 - 13:29 — guest

Is it possible to integrate profile files of the old version?

Since new version use an internal save/load of profiles, I wondered is there a way to re-use old profiles, saved with the previous version? I checked the MotionInJoy folder in the "program files" I didn't find any folder that holds any profiles at all. Thanks for your help in advance! P.S: Otherwise I'll have to remake every profile I made before XD

Fri, 01/29/2010 - 07:13 — guest

Its possible but...

You can find the the new Profiles in the File:C:\Users\("youruser")\AppData\Roaming\MotioninJoy\DS3tool\appconfig.xml

The old Mjj Files are xml too. Look inside with a editor
the Old Format strings looks like this
<Item index="00" desc="" Commandtype="03" CommandValue="2C" />

The New Strings in Appconfig are different in order:<a>
<Item index="0" CommandType="3" CommandValue="2c" desc="" />

But its possible to copy the old strings from your xxxxxx.mjj in the new appconfig.xml ...you must only move:

desc="" to the end of String and
delete the first 0 from the items: Item index= and commandtype=

At this time is it the only way...My wish... to the guys of DS3 please coding a little convert Tool :) i have over 35 Profiles its not funny to convert it step by step ;)but big thx for the great work the new virtual Keyboard is the right way :))xxx Kami

Fri, 01/29/2010 - 07:11 — guest

Its possible but...

You can find the the new Profiles in the File:C:\Users\("youruser")\AppData\Roaming\MotioninJoy\DS3tool\appconfig.xml

The old Mjj Files are xml too. Look inside with a editor
the Old Format strings looks like this
<Item index="00" desc="" Commandtype="03" CommandValue="2C" />

The New Strings in Appconfig are different in order:<a>
<Item index="0" CommandType="3" CommandValue="2c" desc="" />

But its possible to copy the old strings from your xxxxxx.mjj in the new appconfig.xml ...you must only move:

desc="" to the end of String and
delete the first 0 from the items: Item index= and commandtype=

Fri, 01/29/2010 - 07:59 — guest

I forgot these...

Rename these too: (look at lower case and upper case)

from Commandtype to CommandType
very important to change Upper case like these C in c or 1E in 1e

Thats all

Sat, 01/23/2010 - 15:47 — guest

Pissed

I am in the same boat and I am PISSED!!! It took time getting all my old games which you can not change the controls of to work! I have at least 5 profiles that took quite a while to get perfect and now I can't load them!

Sat, 01/23/2010 - 11:59 — guest

Is motion sensing possible now?

Hi!

I like your work and I really hope for you to get a MS signature, so anyone can enjoy it without the pain in the *** installation.

My question is, if there are any improvements in the motion sensing part?
In the last version it seemed to be pretty left out.
You could calibrate it, but you only got like 10 steps of sensitivity, which renders it too edgy to play with.

So is it working properly now?
I'm asking instead of just trying myself, because I don't wanna mess up my freshly installed Win7 x64 again and rather wait for the next version.

Thanks,
Murphy

Sat, 01/23/2010 - 08:42 — guest

Awesome

Great Done. Is working perfectly for me. I don't know about vibration since I use a Sixaxis but you are doing an excellent work.

Thu, 01/28/2010 - 06:08 — guest

Bt works too?

Could you tell your Bt mark cause i think mine its not working because of it.Thx

Sat, 01/23/2010 - 07:54 — guest

bluetooth fail to work

Hi , i have win7 x64last driverdualshock3sixaxisbelkin BT dongle F8T017am i not supposed to have two controller in the windows control panel ?(one for the USB connection and one for the BT connection)because i have always one !My BT dongle is recognized and the mijxfilt driver installed just fine !i can see my Bt dongle in the pairing tab in ds3tooli have the ability to pair in ds3tool , but when i unplug usb , there is no game controler in the windows control panel because i have only one controler when both usb and BT are connected.PS : i dont think i am really paired with the BT , because the led never stop blinking when i disconnect usb maybe its because i dont have the BT controler in the windows control panel

Thu, 01/28/2010 - 06:15 — guest

Mine its not blinking

the lights gets freeze,but no working button at all.And there's no 2 controllers on control painel,but one and one BT device.

Sat, 01/23/2010 - 02:31 — wildboy99

Cant install bluetooth drivers

First off great job on the battery meter and the new custom profile setting will make playing games much easier, however i can not install bluetooth drivers. This was also a problem in version 3 but then i was able to edit the driver install file and add my usb dongles hardware id and it worked but now its different and i am not sure. its hardware id is USB\VID_1131&PID_1001 would you be able to assist me in making my bluetooth dongle work? Also the left motor test does not work for me but i think both motors are vibrating and are both controlled by the right motor test sliderPS i am running Windows 7 x64 build 7600 Thank you for your time Wildboy99

Fri, 01/22/2010 - 08:50 — guest

Windows 7 x64. Vibration problem.

Great job till now with the driver. Everthing works as expected for me except a minor problem. When i run any vibration test the left motor doesnt work for me. I use a DualShock3 controler and tried the vibration test in both XBox360,Analog GamePad and Digital Gamepad (aldo i-am not sure those matter in any way since the test might be done directly by the driver and not throught the direct input api). Both bluetooth and usb experience the same problem.

Sun, 02/07/2010 - 23:21 — guest

Same Problem, but more serious

I am using Windows 7 Ultimate x64 and connect the DS3 with USB cable. All functions are work fine, except the vibration. Although i press the vibration test button, there no any reponse.

Fri, 01/22/2010 - 08:47 — guest

Windows 7 x64. Vibration problem.

Thu, 01/21/2010 - 15:10 — raven7185

great

works fine for me when you follow the step below me...only problem is still the vibration in bt xbox360 mode.....still great work.... keep it up.....

Thu, 01/21/2010 - 12:23 — timausnrw

Ok a little Problem with

Ok a little Problem with Bluetooth after install 4.00.2, but the Trick is uninstall the Usb Driver (Xinput for usb) and not the Bluetooth Driver (Xinput for BT) in Devicemanager.an then choose install MotioninJoy Drivers from start menü.It works Correctly!

Thu, 01/21/2010 - 08:03 — Lex

Triggers

Can't still use L2 and R2 while in Analog Gamepad3 Mode. Neither Analog nor Digital.

Sun, 01/24/2010 - 06:36 — Lex

Triggers

Sorry I was wrong. They are working digital. But is it possible to map them to dial in Analog Gamepad3 Mode? I mean it's otherwise unused and I really like to have analog triggers while using the motion sensor.

Thu, 01/21/2010 - 06:34 — guest

cant install bluetooth driver vista x64

i have used and installed the new drivers vers 0.4.i
run vista x64 with ps3 controller connected via usb - all works fine.but i can not install bluetooth driver because under
start>>programms>>motionjoy isn't any link to install the bluetooth driver.

plz give me a hint how to install bluetooth driver without this install link!
greets

Thu, 01/21/2010 - 06:27 — guest

cant install bluetooth driver vista x64

i run vista x64 with ps3 controller connected via usb. all works fine. but i can not install bluetooth driver because under start>>programms>>motionjoy isn't any link to install the bluetooth driverplz give me a hint how to install bluetooth driver without this install link!greets

Wed, 01/27/2010 - 03:02 — guest

having the same problem here

having the same problem here i can't find the bluetooth drivers. i'm using the 32 bit version and there is no link under start programs\motionjoy. or in the folder in program files

Thu, 01/28/2010 - 06:21 — guest

well

I'm pretty sure that 2 drivers are in one...that's why you dont see bt driver,but it install itself

Wed, 01/20/2010 - 23:46 — guest

Driver problems....

Hi, thxs for the job Axcie...is very good driver...I find it this problems:
-Vibration keep every time in Braid, Devil may Cry, etc ...no vibration problem in emulatorsPcsx2 y Dolphin...but this driver version enter lag every time and reduce performance at times(fps slowdowns)-Dualshock3 LED begin in 4 or 3
Please review...
Thanks in advance.

Wed, 01/20/2010 - 22:34 — guest

User login

Navigation

Who's online

Online users

Recent blog posts

Recent comments

Recent forum posts

MotioninJoy ver 0.4 available

Comments

Popular content

Today's:

All time:

Support MotioninJoy!