Home › Blogs › Acxie's blog

64bits sixaxis driver update with game controller remap option

Sun, 08/23/2009 - 09:58 — Acxie
  1. Feature: USB or bluetooth connect. no vibration enable,4 kinds maping, analog Triggers,POV and motion sensor options

  2. System requirements: one free USB BLUETOOTH v2.0 DONGLE, windows vista 64bits,windows 7 64bits

  3. Download here

  4. Restart your system

    (1)Before you install the driver all you have to do is repeatedly press F8 while booting your computer and it will bring up a boot selection screen in which you can choose to start in safe-mode, and other modes.

    (2)Scroll down and select the option that says "Disable driver signature enforcement" The system will boot.


  5. Unzip the file. follow the setup steps.

  6. Plug in your sixaxis or dual shock 3 via USB ,after windows install the default driver, right click (Start->All Programs->MotioninJoy->Install USB driver)run it as administrator.. if you only need USB connect please go to step 8

  7. Unplug the other USB bluetooth dongls if any except the one you need to connect sixaxis or ds3.after windows install the default driver, right click(Start->All Programs->MotioninJoy->Install Bluetooht  driver)run it as administrator. You can plug in the other bluetooth dongles after installation finish if you need to use.

  8. Start->All Programs->MotioninJoy->DS3 TOOL ,now you can set options.

Comments

Tue, 01/12/2010 - 13:10 — guest

Win7 x64 driver without "Disable driver signature enforcement"

"PS3 controller on Win7 x64 without pressing F8", a tutorial to break the annoying F8 pressing while booting.http://passsy.wordpress.com/2009/12/26/ps3-controller-on-win7-x64-withou...play gamepad games without restarting your pc.

Tue, 01/26/2010 - 15:36 — guest

New Link

http://www.passsy.de/2009/12/26/ps3-controller-on-win7-x64-without-press...the blog got a new domain.

Fri, 12/11/2009 - 08:22 — guest

bluetooth woes

I am able to install both usb and bluetooth drivers but when I test the gamepad functions only USB responds. When I open DS3 Tool and click pair, and then unplug the USB cable, the controller does not sync up. I have a MotioninJoy BT HID DEVICE in my device manager also. I am using a Belkin F8T016. I am currently running Windows 7 x64. This is the log of my bluetooth driver install: INFO:MotioninJoy Driver install logINFO: Driver install EnterINFO: argc0="D:\Program Files\MotioninJoy\ds3\MijCmd.exe"INFO: argc1="/i"INFO: argc2=".\drivers\MijBThid.inf"INFO: DriverPackageInfPath="d:\Program Files\MotioninJoy\ds3\drivers\MijBThid.inf"INFO: >>>>>installing driver package.LOG Event: 1, ENTER:  DriverPackageInstallWLOG Event: 2, DRIVER_PACKAGE_LEGACY_MODE flag set but not supported on Plug and Play driver on VISTA. Flag will be ignored.LOG Event: 1, Looking for Model Section [Vendor.NTAMD64.6.1]...LOG Event: 1, Installing INF file 'd:\Program Files\MotioninJoy\ds3\drivers\MijBThid.inf' (Plug and Play).LOG Event: 1, Looking for Model Section [Vendor.NTAMD64.6.1]...LOG Event: 1, Installing devices with Id "USB\VID_0A5C&PID_2101&REV_0100" using INF "C:\Windows\System32\DriverStore\FileRepository\mijbthid.inf_amd64_neutral_47ce3a4a4f504367\mijbthid.inf".LOG Event: 1, Will force install because driver is not better and force flag is set.LOG Event: 1, ENTER UpdateDriverForPlugAndPlayDevices...LOG Event: 0, RETURN UpdateDriverForPlugAndPlayDevices.LOG Event: 1, Installation was successful.LOG Event: 0, Install completedLOG Event: 1, RETURN: DriverPackageInstallW  (0x0)SUCCESS: installed package d:\Program Files\MotioninJoy\ds3\drivers\MijBThid.inf. Where can I look for more help? I have gone up and down the forums looking for threads. I've tried uninstalling and reinstalling; I also tried 0.400 and 0.300. Please help.

Sun, 01/24/2010 - 19:05 — guest

..how did you even do this shit..???

Omfg, I can't even get the usb to connect...I only got it one time...-_-'' After installing the drivers I don't even see it show up and I've been turning on the controller, DC'd my ps3 to keep it from interrupting....so irritating.

Fri, 12/11/2009 - 08:07 — guest

bluetooth woes

I am able to install both usb and bluetooth drivers but when I test the gamepad functions only USB responds. When I open DS3 Tool and click pair, and then unplug the USB cable, the controller does not sync up. I have a MotioninJoy BT HID DEVICE in my device manager also. I am using a Belkin F8T016. This is the log of my bluetooth driver install: INFO:MotioninJoy Driver install logINFO: Driver install EnterINFO: argc0="D:\Program Files\MotioninJoy\ds3\MijCmd.exe"INFO: argc1="/i"INFO: argc2=".\drivers\MijBThid.inf"INFO: DriverPackageInfPath="d:\Program Files\MotioninJoy\ds3\drivers\MijBThid.inf"INFO: >>>>>installing driver package.LOG Event: 1, ENTER:  DriverPackageInstallWLOG Event: 2, DRIVER_PACKAGE_LEGACY_MODE flag set but not supported on Plug and Play driver on VISTA. Flag will be ignored.LOG Event: 1, Looking for Model Section [Vendor.NTAMD64.6.1]...LOG Event: 1, Installing INF file 'd:\Program Files\MotioninJoy\ds3\drivers\MijBThid.inf' (Plug and Play).LOG Event: 1, Looking for Model Section [Vendor.NTAMD64.6.1]...LOG Event: 1, Installing devices with Id "USB\VID_0A5C&PID_2101&REV_0100" using INF "C:\Windows\System32\DriverStore\FileRepository\mijbthid.inf_amd64_neutral_47ce3a4a4f504367\mijbthid.inf".LOG Event: 1, Will force install because driver is not better and force flag is set.LOG Event: 1, ENTER UpdateDriverForPlugAndPlayDevices...LOG Event: 0, RETURN UpdateDriverForPlugAndPlayDevices.LOG Event: 1, Installation was successful.LOG Event: 0, Install completedLOG Event: 1, RETURN: DriverPackageInstallW  (0x0)SUCCESS: installed package d:\Program Files\MotioninJoy\ds3\drivers\MijBThid.inf. Where can I look for more help? I have gone up and down the forums looking for threads. I've tried uninstalling and reinstalling; I also tried 0.400 and 0.300. Please help.

Thu, 11/19/2009 - 11:21 — guest

Gears of War

Does the dualshock 3 controller also work with gears of war?

Wed, 11/04/2009 - 09:36 — guest

Great work!!

This works flawlessly in Windows 7 Ultimate x64. Followed all the steps and rything is working ok.I hope you find a way to have more than one controller per BT adapter.Great work.Thanks!!

Sat, 09/26/2009 - 03:01 — guest

AMAZING!!!!!

you are a god!!!!!!!!!!!!!!!!!!!!!!!! please keep up the good work, vibration for x64 would be fine too :):):)

Wed, 09/30/2009 - 02:11 — jj2208

vibration

vibration is working for me     h t t p://www.motioninjoy.com/uploadfiles/MotioninJoy_vibration_0100.rar     working fine in need for speed shift and gta 4

Wed, 09/23/2009 - 14:32 — guest

XP 64 Its not working =/

Hello,i'm using this on Win Xp 64bit and it doesent work..could somebody please help me?=/

Wed, 08/26/2009 - 04:56 — guest

Your efforts are apperciated,

Your efforts are apperciated, but I'll stick to the old version until x64 vibration is fixed (no need for the mapping option).Thanks :)

Tue, 08/25/2009 - 08:30 — guest

thanks acxie

hi there again, thanks for your help, i eventually managed to get the files deleted from driverstore but they were a pain. when i installed the usb driver and checked the controller the right stick worked beatufully, but when i installed bluetooth the right stick was broken, but i went into the game controller settings in device manager and callibrated the controller and it seemed to work after that.  so far so good, but the only other prob is the vibration only vibrates at the left side, but thats not to worry about.  thanks again

Mon, 08/24/2009 - 17:54 — guest

hi, i tried setting the

hi, i tried setting the default in the options but the right analogue stick is still briken, i also tried change the remap options for the right stick but nothing. also when i use vibration, only he left motor vibrates, the right does nothing.  thanks

Mon, 08/24/2009 - 09:14 — guest

ok, i got it working, i

ok, i got it working, i downloaded 0200 and it installs fine but the right analogue stick is broken, it dosent go fully right, only half way, also got vibration working, thanks

Mon, 08/24/2009 - 20:11 — Acxie

If you installed v0.1.00

If you installed v0.1.00 before please try delete the device in devie manager and clear your driverstore cache that default  is in"C:\WINDOWS\system32\DRVSTORE".Reinstall the driver.

Mon, 08/24/2009 - 10:13 — Acxie

You can try set default in

You can try set default in game controller panel.

Mon, 08/24/2009 - 08:05 — guest

hii have got everyting

hii have got everyting installed fine, but when i open ds3tool, there is no remap options as the title saysim on win 7 64bitthanks

Mon, 08/24/2009 - 08:39 — Acxie

Did you download v 0.2.00?

Did you download v 0.2.00?

Sun, 08/23/2009 - 10:06 — Acxie

2009-07-07 20:11:50 Proceeded

2009-07-07 20:11:50

Proceeded with some testing on XP 32-bit instead. Got USB working, yay!

But the laptop's built-in bluetooth device seems to just disable
itself and disappear from device manager. It's still gone after a
reboot. The systray bluetooth icon has the red B on it (like not
connected). Pressing the PS button does not connect the controller, it
just flashes for a while. I have the HID device though and it seems to
be OK. If I uninstall that one (and scan for new hardware) it finds the
bluetooth device again.

I have no idea what a "bluetooth stack" is. Does my problem mean
this stuff won't work with this bluetooth device I happen to have and I
need another one instead?

And now I need to pull my hair to get bluetooth working with my
phone again. I genuinely hate bluetooth. And bluetooth hates me back.
I've had nothing but trouble with it. I should have my head examined
for messing with my setup for my phone and sync software. Oh well, live
and learn I guess... or not.

InterClaw



2009-07-16 22:47:49

hi,
i followed all steps correctly ( run drivers as administrator, reboot
with cancel the driver signature ... ) and when i press "Pairing" i get
an error "Reading Master Bluetooth addr failed"

 

System:

HP Notebook: Pavilion dv5 1199eg ( integrated Bluetooth adapter )

Windows Vista x64

 

i dunno how to get it work, plz help :)

ty for your time !!

Sam



2009-07-17 01:41:11

Why
the fuck doesn't this guy write things in simple English?  It's a bunch
of fucking gibberish, links with no explanation...unbelievably horrible.



2009-07-20 04:24:17

make a damn video so it's visual..

moneymeng

Sun, 08/23/2009 - 10:05 — Acxie

2009-06-16 10:00:15 I got

2009-06-16 10:00:15

I got the
software to install and set up the functions using the dstools and
I can see feedback under the test tab for the controller properties,
but the four lights just blink on top. When I hit the PS button,
nothing changes. The game Prototype doesn't recognize the controller as
being there. The controller does appear under the "Devices and
Printers" window.

Win 7 7100 64 bit

phh



2009-06-20 09:28:55

To the misinformed viewing this blog:

These buttons are pressure sensitive: X, O, Triangle, Square, R1,
R2, L1, L2, and the D-pad. (Yes, the D-pad.) Anyone who has played MGS2
and MGS3 can tell you about the pressure sensitivity and its critical
use for these PS2 games. All of the features of the PS2 controller
were inherited by the SIXAXIS.

They can also alternatively be regarded as binary inputs (switch ON,
switch OFF). It just depends on what your driver is paying attention
to, etc etc.

Andrew



2009-06-21 02:44:27

I have bluetooth on my laptop (built in, not USB). Will this driver work with the built in blu-tooth stack?

Piero



2009-06-21 05:41:56

 ATTENTION:

For those of you struggling with the "cannot find devnode"
error: GET A NEW BLUETOOTH ADAPTER. That is -the- only way to make it
work. If you are forced into the Windows Bluetooth stack, you are
completely -fucked-, because this does not work with the Windows stack.
At all. There is no way around this. Look into a TrendNET or Kensington
adapter, or any that will work with the BlueSoleil stack. I've tested
this on -4- different types of Bluetooth chipsets. You can get a
TrendNET Bluetooth 2.0+EDR 100m range from Newegg.com for about $20 and
it works great.



2009-06-21 05:47:09

 The one above this one is mine, too. Sorry, forgot the author bit =)

Also: You -can- connect 2 PS3 controllers at the same time if you're
willing to go one over Bluetooth and one over USB. Until Motioninjoy
hacks it out so that we can get 2+ controllers on one Bluetooth
adapter, this is a reasonable solution. The USB will always funtion as
JOY1 if the two are plugged-in like that, though, regardless of which
one is plugged-in first. Kind of a bitch, buh eh.. workable.

Matokira



2009-06-29 10:22:12

As
far as I can tell. Driver will not work if you are using Vista 64 Bit
with SP2 installed. Even if you follow all the directions exactly right.



2009-07-01 21:31:39

I
am using Vista x64 with SP2 installed and I must agree with the above
person, I couldn't get the driver to work and I was given a message
from windows saying the driver had files missing or corrupt. For some
reason even after I had used the 'disable driver signiture
reinforcment' feature I was still given and error saying that the
driver hadn't got a signiture. I tried again and rebooted the computer
without getting the signiture error but I still got the driver error
window. I hope you guys can fix it though because this driver is beter
than that other one floating around.

Crowbar



2009-07-02 07:38:33

also the same not working, using vista 64 SP2 

Nico



2009-07-06 16:05:41

yep vista 64 sp2 not working with usb

gg



2009-07-07 18:58:03

Same
here. Tried manually installing the USB driver as well. Cannot load the
driver, may be corrupt blah blah, error code 39. I have disabled driver
integrity check by means of:

bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECK

InterClaw

Sun, 08/23/2009 - 10:04 — Acxie

2009-06-06 05:14:02 I

2009-06-06 05:14:02

I tried
hooking up a second controller.  In control panel it detected two
Motion-in Joy devices however niether of them would work on
calibration.  The only thing that did work was the start button on the
controller I had originally configured.  I unplugged both, then plugged
one in again and it worked great again.  It has to be in the USB port I
originally installed it in, though.  Again, I would appreciate any help
with people who have configured two controllers.  Thanks!

Michael



2009-06-08 00:21:12

Hello all,

This bluetooth found good http://www.energysistem.com/es-es/web/bluetooth/serie_linnker_1000 the model "Linnker 1290", but the option motion don´t found good

macamba



2009-06-08 04:04:12

The 64 bit driver is not working on my 64 bit Windows home premium.

I followed the instructions exactly right after I install the driver
I open the tools and try to enable my controller options and nothing.
Anyone have an idea?

ASUSlover



2009-06-08 15:23:36

 I'm
having the same problem as many of you. When I try to install the
Bluetooth driver, it says "There aren't any live devnodes with the
DeviceId contained in the INF." Can you assist?

Matokira



2009-06-09 18:51:08

First,

THANK YOU! Thank you for all your work! I appreciate it!

Next, I can confirm. With DS3Tool, under Options, "Analog Gamepad 2
(POV, Joysticks, Analog Triggers)" breaks the Right Stick. With Analog
Gamepad 1 (POV, Joysticks), Right Stick uses Z-Axis and Z-Rotation in
ControlPanel->Game Controllers. But, in Analog Gamepad 2 (POV,
Josticks, Analog Triggers), Right Stick uses only Z-Axis. Buttons L2
and R2 use Z-Rotation. With Analog Gamepad 3 (POV, Joysticks, Analog
Triggers, Motion Sensing), the L2 and R2 buttons lose Analog Trigger
ability. L2 and R2 become normal buttons, not Analog Buttons. Right
Stick only uses Z-Axis.

Thank you! I think all buttons should use Analog Triggers. In some
games you must press X, O, Triangle, Square very hard or very soft.

SadPanda



2009-06-10 01:23:31

SadPanda:

You can't use a digital button as an analog axis... X, O and the
other buttons (expect L2, R2) are not pressure sensitive on the
controller... You want to do something in a software, that the hardware
can't do...

 

However i can confirm the other things people said: Analog 2 and 3
is fucked up, and i have the "There aren't any live devnodes with the
DeviceId contained in the INF." problem too.

BUT this is still an awesome work, so thank you for making it! Keep up the good work! :P

I'll use to analog 1 mode until an update comes :)

Borda



2009-06-10 15:47:13

Borda:

Thanks! I'm glad someone else was able to replicate the problem!

 

BUT, I DO think some games use pressure sensitive buttons! Metal
Gear Solid 4, for example, uses it for CQC. And Grand Turismo also uses
it for accelleration. As does Burn Out, I believe.

 

SadPanda



2009-06-12 09:32:12

I
can't remember if it's X and O or X and [] that are pressure sensitive,
but it's been that way since PS2. The Mayflash PS2 drivers recognize
this. Anyhow, IMO that's not a big deal. Neither is the motion sensing,
as interesting as the idea seems. I would just love to see the triggers
made into analogue without sacrificing the Zr. :P Aside from that,
though, this is a fantastic driver set. Keep up the great work. I look
forward to trying the BT drivers tomorrow.

Break



2009-06-14 07:26:16

I'm
pretty sure all four face buttons on the sixaxis are pressure
sensitive. They were on the DS2. Circle X and triangle definitely are,
I don't see why they'd leave out square.

mmnno



2009-06-14 18:10:09

Any news on vibration support?  No rush of course :)



Sun, 08/23/2009 - 10:03 — Acxie

2009-05-30 22:13:01 im using

2009-05-30 22:13:01

im using 7127 windows 7 64

i can use the ps3 joystick with usb connecftion

but my bt adapter cant detect the joystick . why?

The BT adapter already called MotioninJoy BT HID Device

kit



2009-06-01 04:13:11

I'm
having the same exact problem as kit. I'm in Windows 7 x64 7100, and my
BT adaptor doesn't pick up the controller at all. I clicked the pairing
button in the DS3_Tool and everything. Works perfectly over USB, but
doesn't function on Bluetooth at all.

Genome



2009-06-01 04:56:17

Everything
runs really smooth but the right joystick isn't able to turn to the
left nor right on analog gamepad 1 and not up and down on analog
gamepad 2. A bit dissapointing as I finally thought that I was going to
be able to play some Marvel VS capcom 2 on my pc :(.

Sepok



2009-06-01 08:51:07

It seems that one gamepad will occypy "one" BT adapter?

But I have 2 BT devices, mouse and sixaxis, can't it run together?



2009-06-01 12:02:16

^

You will need a second BT Adaptor



2009-06-02 13:12:16

Analog
Gampad 2 right trigger not detecting up/down movement, and to Jav1: The
both triggers are supposed to be mapped to 1 axis, for reference, the
360 controller's triggers are mapped the same way.

TheAsterite



2009-06-03 02:13:53

Thanks, both USB and Bluetooth work great for me :)

All we need now is vibration ;)

Sovereign



2009-06-03 04:30:44

Bluetooth not working  for me

Dante



2009-06-05 02:52:36

after trying to install BlueTooht driver notepad opens and shows this,IS THERE ANY SOLUTION?thanks

INFO:MotioninJoy Driver install log

INFO: Driver install Enter

INFO: argc0="C:\Program Files\MotioninJoy\ds3\MijCmd.exe"

INFO: argc1="/i"

INFO: argc2=".\drivers\MijBThid.inf"

INFO: DriverPackageInfPath="C:\Program Files\MotioninJoy\ds3\drivers\MijBThid.inf"

INFO: >>>>>installing driver package.

LOG Event: 1, ENTER:  DriverPackageInstallW

LOG Event: 2, DRIVER_PACKAGE_LEGACY_MODE flag set but not supported on Plug and Play driver on VISTA. Flag will be ignored.

LOG Event: 1, Looking for Model Section [Vendor.NTAMD64.6.1]...

LOG Event: 1, No matching devices found in INF "C:\Program Files\MotioninJoy\ds3\drivers\MijBThid.inf" on the Machine.

LOG Event: 1, RETURN: DriverPackageInstallW  (0xE000020B)

INFO: There aren't any live devnodes with the DeviceId contained in the INF.

 

turbozob



2009-06-06 05:04:41

Using
Sony Vaio NS with Vista Home Premium 64 bit.  Thanks a lot!  This works
great!  The right joystick still has some issues (only reads left and
right) but other than that it's perfect.  One Question, though.  Can
you hook up a second controller?  If so, how would I go about doing
that?

Michael

Sun, 08/23/2009 - 10:00 — Acxie

2009-05-29 13:12:30 it seems

2009-05-29 13:12:30

it seems the 64-bit driver download link isn't working.

Logicwax



2009-05-29 13:57:48

I have fixed it.

ipvideo



2009-05-29 18:28:26

its march usb, but it will not always walk in bluetooth

Dante



2009-05-29 22:11:42

will vibration and other features be available for usb connection too?



2009-05-30 00:52:06

Sov



2009-05-30 03:49:41

help me for the Bluetooth connection is why its not sync

Dante



2009-05-30 04:03:38

hello
I wanted to tell you that you made an excellent job, and also to ask
you something. Here is my usb key bluetoohth which is here,

http://www.rueducommerce.fr/Peripheriques-Reseaux-wifi/Adaptateur-USB-Bl...

and who has the code, USB\VID_0A5C&PID_2100

his name is BCM2045A


so I wanted to
know why, when its needs to synchronize its flashing the USB stick and
throttle for 30 sec, and nothing after the connection is not. help me
please

Dante



2009-05-30 11:38:22

For some reason, my two analog sticks aren't working. Amy Ideas?



2009-05-30 20:30:26

updated, excellent vibration works very well, I know not why, but it works

Dante



2009-05-30 22:11:19

Sun, 08/23/2009 - 09:59 — Acxie

2009-05-28 20:40:06 Testing

2009-05-28 20:40:06

Testing 64bits drivers.(USB and BT)

My OS: Vista Ultimate x64 SP2

Ok, driver works but it has some bugs:

- 4 kind of mapping does not work correctly. Best choice for now is
Analog Gamepad1 (which is the same mapping that the previous driver
had).

- Analog triggers work now but  there is a problem: L2 and R2 are in
1 axis instead of 2. There should be an axis for each analog trigger
(correct me if i'm wrong).

- For some reason i get an error when I exit DS3 Tool. If I click on
error details it says "flash.ocx is missing in this Windows version" or
something like that.

- This is not a bug, just a question. It will be possible to pair 2 Sixaxis / DS3 in the future using 1 BT adapter?

Thank you for your work.

Jav1



2009-05-28 20:48:24

Now only  pair one BT adapter to one gamepad, One BT adapter to two or more will implement it in the future.

ipvideo



2009-05-28 20:50:20

I'll develop vibration function first.

ipvideo



2009-05-28 21:19:15

Thank you so much... waiting vibration function....

bkninja



2009-05-29 01:14:41

the
throttle is always not to connect to the USB key, and vibration not
otherwise excellent pilot, but a bug on the maping and I still have the
error when I farm flash.ocx missing

Dante



2009-05-29 04:32:31

my feedback on win7/x64 (deseo signed drivers in test mode):

when using mode 2 (with analouge triggers) i can not use the y-axis
of my right stick. the z-rotation is occupied by the shared trigger
axis (which i too would rather split into two seperate axis).

when using mode 3 (with motion) i do not get the triggers to work at
all. and the motion sensor just behaves oddly, jumping between values
when normally moving the controller. also it can not be calibrated
correctly as the axis are not shown to be moving on the calibration
screen (you can only see any movement at all when displaying raw data).
all the motion seems a little wierd at the moment.

 

great project neverless, please keep up the excellent work!



2009-05-29 05:58:40

this is what i got when i try to install the bluetooth drive

 

INFO:MotioninJoy Driver install log

INFO: Driver install Enter

INFO: argc0="C:\Program Files\MotioninJoy\ds3\MijCmd.exe"

INFO: argc1="/i"

INFO: argc2=".\drivers\MijBThid.inf"

INFO: DriverPackageInfPath="C:\Program Files\MotioninJoy\ds3\drivers\MijBThid.inf"

INFO: >>>>>installing driver package.

LOG Event: 1, ENTER:  DriverPackageInstallW

LOG Event: 2, DRIVER_PACKAGE_LEGACY_MODE flag set but not supported on Plug and Play driver on VISTA. Flag will be ignored.

LOG Event: 1, Looking for Model Section [Vendor.NTAMD64]...

LOG Event: 1, No matching devices found in INF "C:\Program Files\MotioninJoy\ds3\drivers\MijBThid.inf" on the Machine.

LOG Event: 1, RETURN: DriverPackageInstallW  (0xE000020B)

INFO: There aren't any live devnodes with the DeviceId contained in the INF.

the usb drive installed succesfully

also the ds3 tool when i use it to try to update the drive and the
gamemapping it alway stops working when i hit start update i say the
update has stoped working and exists out of the ds3 tool



2009-05-29 06:14:47

Can't
seem to get it to work, I uninstalled all the previous versions of the
drivers and reinstalled them using the 2 installers included with this
file. It always says that the BT pairing was successful, but when i
disconnect the USB cable and hit the PS button, the 4 LED's just blink
and it never connects via bluetooth. Anyone got any ideas?

Fuse



2009-05-29 06:15:03

I'm on Win7 x64 btw

Fuse



2009-05-29 13:11:15

I'm pretty sure you're my favorite person ever, thanks ipvideo for all of your (free) work.

Kalessian

Thu, 09/24/2009 - 07:29 — guest

vista 7 x64 and works perfect

vista 7 x64 and works perfect

Tue, 09/22/2009 - 00:35 — guest

Problem :P

hi all, i have a problem.the usb is working for me, but the bluetooth not :Si bought a new bluetooth dongle 2.0 but when i click pairing it keeps saying: Update sixaxis's pairing addr failed, plugin your sixaxis or DS3 via USB and install USB driver first. but like i said, the USB is working so anyone knows how to fix this problem? i have windows vista 64 bit, and SP 1 i quess... :Pthanks alot!